morlux® UV-Curable Coatings

Formulated on a combination of resins, fillers and initiators, these products are suited to various substrates including veneer, solid wood and engineered board. With excellent sanding properties they provide a smooth and resilient base for application of Morlux topcoats.

• Pack sizes available: 20L

The careful selection of resins, matting agents, waxes and photoinitiators has produced coatings that are ideally suited to application by conventional rollercoaters. They offer superb chemical and physical resistance properties coupled with a smooth aesthetic appearance and touch.

• Pack sizes available: 20L
• Coverage: 8 - 200m² per litre
• Typical Finish: 2 - 3 coats at 10gm², 1 coat at 6 - 10gm² as a coat on coat system

The balanced combination of resins, matting agents, waxes and photoinitiators have been formulated to be applied over pre-sealed substrates using grooved Opti/Lazer rollercoaters. As with the conventional topcoat they provide a smooth and aesthetically pleasing finish with excellent chemical and physical resistance properties.

• Pack sizes available: 20L
• Coverage: 30 - 55m² per litre
• Typical Finish: 1 - 2 coats at 20 - 25gm², coat on coat or over Morrells recommended basecoat/sealers

These lacquers are based on a combination of solvent free UV-curable acrylate resin systems and selected fillers. They have been specifically formulated to provide the benefits of a conventional basecoat coupled with the surface properties of a topcoat, for use as a coat-on-coat system. As with all Morlux products they offer supreme chemical and physical resistance properties in combination with a very flat and smooth surface finish.

• Pack sizes available: 20L
• Coverage: 80 - 200m² per litre
• Typical Finish: 2 - 3 coats at 10 – 15 gm², 1 coat at 6 - 10 gm²

With excellent drying properties and adhesion to various substrates, these lacquers provide finishes with superb appearance and feel. They are formulated for autospray application and therefore are ideally suited to finishes on profiled and routered panels.

• Pack sizes available: 20L
• Coverage: 240 - 320m² per 20 litres dependent upon the size, orientation and surface quality of the item being coated

These products are specifically formulated to be low viscosity for vacuum coating. Their reactivity allows them to be used at line speeds in excess of 50m per minute.

• Pack sizes available: 20L