A fast drying, high build range of lacquers protected against the growth of microorganisms (such as MRSA, E. coli, A. niger) on their surface, with a kill rate of 99% within 24 hours. The use of medicote® lacquer is not a replacement or substitute for proper hygiene and cleaning. The risk of odour, and deterioration and discolouration of the film by microorganisms is greatly reduced through the use of antimicrobial agents in the lacquers.  Meets the requirements of FIRA Standard 6250: 2005 for horizontal surfaces (excluding kitchen worktops) and rated as Heavy/Severe Use.

• Pack Size: 5L & 25L
• Catalysis: 9 parts lacquer : 1 part catalyst by volume
• Pot Life: 36 hours
• Touch Dry: 15 - 20 minutes @ 18°C
• Sandable: 1 hour @ 18°C
• Recoatable: 1½ hours @ 18°C
• Packing: Overnight minimum
• Coverage: Approximately 40m² per 5 litres dependent upon the size, orientation and surface quality of the item being coated
• Tinting: Use Morrells Light Fast Stains up to a maximum of 5% by volume

A range of ultra high performance waterborne lacquers. These lacquers are protected against the growth of microorganisms (such as MRSA, E.coli, A. niger) on their surface, with a kill rate of 99% within 24 hours. The risk of odour, and deterioration and discolouration of the film by microorganisms is greatly reduced through the use of antimicrobial agents in the lacquers.  The use of medicote® lacquer is not a replacement or substitute for proper hygiene and cleaning.  This range offers similar performance and properties as a high quality Acid-Catalyst lacquer. Certified to FIRA 6250 for horizontal surfaces (excluding kitchen worktops) in Heavy/Severe Use and BS 6222, Part 3 – Domestic Kitchen Equipment Finish Performance, Other Surfaces.  Recommended for use as a coat-on-coat system.

• Touch Dry: 30 minutes @ 18°C
• Sandable: 1½ hours @ 18°C
• Recoatable: 1½ hours @ 18°C
• Packing: Overnight minimum
• Coverage: Approximately 40m² per 5 litres dependent upon the size, orientation and surface quality of the item being coated
• Tinting: Use Morrells Light Fast Stains up to a maximum of 5% by volume

This range of lacquers protects against the growth of microorganisms (such as MRSA, E.coli, A. niger) on their surface, with a kill rate of 99% within 24 hours. The risk of odour, and deterioration and discolouration of the film by microorganisms is greatly reduced through the use of antimicrobial agents in the lacquers.  The use of medicote® lacquers is not a replacement or substitute for proper hygiene and cleaning.  These products offer supreme chemical and physical roller coaters operating in either forward or reverse mode.  These lacquers are supplied ready-for-use and can be cured by means of UV light, utilising medium pressure mercury lamps (Hg) with an output of 80w/cm or higher.  The maximum curing speed will depend on the condition of the line and the total energy output of the lamps against line speed.

• Coverage: With typical coating weights of 6 – 15 gm², coverage of these materials can range between 80 - 200m² per litre